薛志刚，男，1987年出生，中共党员，博士。2013年6月获湖南大学材料工程专业硕士学位（省优毕业论文），2024年6月获湖南大学机械工程专业工学博士学位，同年进入湖南工学院工作。主要从事汽车车身先进连接技术、金属防腐蚀技术等领域的研究，在Journal of Manufacturing Processes，Thin-Walled Structures，Electrochimica Acta等国际知名期刊发表学术论文20余篇，单篇最高被引190余次。

参与项目

[1] 国家重点研发计划新能源汽车专项：轻量化纯电动轿车集成开发技术

[2] 吉利某车型钢铝/混合车身自冲铆接技术开发项目

[3] 国家自然科学基金面上项目：考虑成形历史的钢/铝混合车身铆接接头精细化仿真建模及碰撞失效预测

[4] 一汽连接接头强度失效仿真技术开发项目

工作经历

[1]2014.10—2019.12 湖南仲腾汽车技术有限公司（长安汽车技术支持）   工程师，经理

[2]2013.7—2014.9 东风悦达起亚汽车技术有限公司               工程师

发表论文

[1] Zhigang Xue, Xinyi Wang, Congchang Xu, Ziming Chen, Xiaohua Feng, Qiaoying Zhou, Jianpeng Liu & Luoxing Li. Equivalent characterization of pre-strained material properties and mechanical behavior prediction of steel/aluminum self-piercing riveted joints. Thin-Walled Structures, 2023, 182: 110243. (SCI, 中科院1区TOP, IF =6.4)

[2] Zhigang Xue, Zhong Yang, Congchang Xu, Ziming Chen, Zhenhu Wang, Qiaoying Zhou, Jianpeng Liu & Luoxing Li. An improved simplified model of self-piercing riveted joints for predicting quasi-static mechanical behavior of steel–aluminum hybrid components, Journal of Manufacturing Processes. 108 (2023) 457-474. (SCI, 中科院1区TOP, IF =6.2)

[3]Liu Jianpeng, Xue Zhigang, Guo Pengcheng, Xu Congchang*, Li LX. Reinforcement and toughening of the self-piercing riveted bonded joint induced by the pre-embedded adhesive in rivet cavities. Polymer Composites, 2024, 23: 1-20.

[4]Liu Jianpeng, Xue Zhigang, Yu BJ, Sun LW, Xu CC*, Li LX. Influence of predrilled holes in the upper sheets on the formability and bearing capacity of self-piercing riveted bonded structural components. Materials Today Communications, 2024, 41: 110584.

[5] Yingliang Cheng, Zhigang Xue, Qun Wang, XiangQuan Wu, E. Matykina, P. Skeldon & G. E. Thompson. Thompson, G. E. New findings on properties of plasma electrolytic oxidation coatings from study of an Al–Cu–Li alloy. Electrochimica Acta, 2013, 107: 358-378.（SCI, 中科院1区TOP，导师1作，IF =6.4）

[6]薛志刚, 程英亮, 吴湘权, 吴有伍, 李劲风. 2A97铝锂合金等离子电解氧化膜的制备和耐蚀性能. 中国有色金属学报, 2013, 23(7), 9. (EI)

[7] Sawei Qiu, Zhigang Xue, Hong He, Zhong Yang, Erli Xia, Congchang Xu & Luoxing Li. Multi-objective optimization study on the power cooling performance and the cooling drag of a full-scale vehicle. Structural and Multidisciplinary Optimization, 2021, 64(6): 4129-4145. (SCI，中科院2区)

[8] 陈梓铭, 薛志刚, 张松, 李落星. 基于adams与simulink联合仿真的滑移门关闭能量分析. 中国机械工程, 2020, 31(8), 7. (EI)

[9] 周巧英, 薛志刚, 周五峰, 林启权, 李落星. 滑移门保持件结构布置多目标优化. 汽车工程, 2019, 041(006), 717-722,730. (EI)

[10] 文学，薛志刚，林启权，李落星，潘罗. 基于SPEOS的汽车中控屏防眩目仿真精度影响因素研究. 汽车技术, 2019, (1), 6. (CSCD)

[11] Qiuping He, Zhigang Xue, Wufeng Zhou. Optimization for qualified structures intension of sliding door based on regulation and a study about key and important factors affecting simulation accuracy. 第19届亚太汽车工程年会暨2017中国汽车工程学会年会.（获奖论文）

[12] Erli Xia, Ziming Chen, Zhigang Xue, Sawei Qiu, Congchang Xu, Hong He & Luoxing Li. An equivalent NVH model of vehicle door seal strip and its applicatison in door vibration problem [J]. Applied Acoustics. 2021,179:1-10. (SCI，中科院2区)

[13] Congchang Xu, Hong He, Zhigang Xue，Luoxing Li, A detailed investigation on the grain structure evolution of AA7005 aluminum alloy during hot deformation, Materials Characterization, 2021, 171:110801. (SCI，中科院2区)

[14] Ziming Chen, Sawei Qiu, Zhigang Xue，Luoxing Li. Aerodynamic behavior during closing of sliding door based on fluid–solid coupled simulation[J]. Physics of Fluids, 2024, 36. (SCI，中科院2区)

[15] Yingliang Cheng, XiangQuan Wu, Zhigang Xue, E. Matykina, P. Skeldon, G.E. Thompson. Microsructure, corrosion and wear performance of plasma electrolytic oxidation coatings formed on Ti-6Al-4V alloy in silicate-haxametaphosphate electrolyte. Surface and Coatings Technology. 2013, 217(25): 129-139. (SCI，中科院2区)

[16] Liang Xu, Zaiqi Yao, Jianpeng Liu, Zhigang Xue, Congchang Xu, Hong He & Luoxing Li. Constitutive Model Parameter Identification for 6063 Aluminum Alloy Using Inverse Analysis Method for Extrusion Applications. Journal of Materials Engineering and Performance, 2021, 30(10): 7449-60. (SCI，中科院4区)

[17] Zhenhu Wang, Erli Xia, Ziming Chen, Zhigang Xue, Luoxing Li. Study on the quantitative relationship between static stiffness and modal parameters of an aluminum space frame [J]. SAE International Journal of Vehicle Dynamics, Stability, and NVH, 2020, 4(2). (EI)

[18] Jianpeng Liu, Wei Wang, Yong Yan, Hong He, Zhigang Xue, Congchang Xu. Influence of raw material surface roughening on the lap shearing strength and failure behavior of adhesively bonded aluminum joints. The International Journal of Advanced Manufacturing TechnologyThe International Journal of Advanced Manufacturing Technology, 2022, , 2022, 122(5–6):1-16. (SCI，中科院3区)

[19] Qiaoying Zhou, Zhong Yang, Chengtai Hu, Junfeng Xing, Congchang Xu, Zhigang Xue, Chao Ma & Luoxing Li. Prediction of the mechanical behavior of steel-aluminum flow drill screw joints using artificial neural network. The International Journal of Advanced Manufacturing Technology, 2023, 129(9): 4553-4567. (SCI，中科院3区)

[20] 张立强, 刘飞, 薛志刚, 刘颖.基于多尺度联合仿真的汽车前罩刚度分析. 塑料工业, 2019, 47(4), 6. (CSCD)

[21] 程英亮，吴湘权，伍帆，薛志刚. 电源参数及KF和SiC纳米颗粒对ZK60镁合金微弧氧化膜的影响，湖南大学学报(自然科学版)，2012, 39(10)60-66.（EI）

[22] Yingliang Cheng, Fan Wu, Jiali Dong, Xiangquan Wu, Zhigang Xue, E. Matykina, P. Skeldon, G.E. Thompson, Comparison of plasma electrolytic oxidation of zirconium alloy in silicate- and aluminate-based electrolytes and wear properties of the resulting coatings, Electrochimica Acta, 85(2012)25-32. (SCI，中科院1区)

发表专利

[1] 李落星; 张欣欣; 王震虎; 薛志刚; 徐从昌; 何洪，一种汽车拖车钩连接结构及汽车，2019-11-22, 中国, CN201910013265.8

[2] 李落星; 雷付煜; 薛志刚; 徐从昌.一种基于成型历史的SPR接头仿真建模方法: CN116522519A (发明公开).