序号 |
论文名称 |
发表刊物名 |
卷号、期号、页码 |
第一作者/通讯作者 |
收录情况 |
1 |
The corrosion response of the heterogeneous nitriding structure originated from the laser additive manufactured steel |
Corrosion Science |
2023, 111188. |
洪悦 |
SCI |
2 |
Evolution of the microstructure and mechanisms of performance degradation in EB-PVD YSZ thermal barrier coatings corroded by volcanic ash at 1150 °C |
Corrosion Science |
2022, 208: 110626. |
夏杰 |
SCI |
3 |
An initio study of thermodynamic and fracture properties of CrFeCoNiMnx (0≤x≤3) high-entropy alloys |
Journal of Materials Research and Technology |
2022, 17: 498-506. |
刘瑜 |
SCI |
4 |
Effect of deformation modes on continuous dynamic recrystallization of extruded AZ31 Mg alloy |
Journal of Alloys and Compounds |
2022, 897: 163086. |
张睿智 |
SCI |
5 |
Carbon quantum dots anchoring on the anti-reflection silica layer as solid luminescence down-shifting materials in solar panel encapsulation |
Solar Energy Materials &Solar Cells |
2022, 235: 111450. |
吕铁铮 |
SCI |
6 |
High-throughput prediction of intrinsic properties of L12-(Nix1,Crx2,Cox3)3(Aly1,Tiy2) precipitates |
Materials Today Communications |
2022, 31: 103655. |
刘瑜 |
SCI |
7 |
Micro Characterization of Hot-Rolled Plate of Nb-Bearing Grain-Oriented Silicon Steel |
Materials |
2022, 15.2: 429. |
汪勇 |
SCI |
8 |
Effect of atmosphere on oxidation behavior of novel high Mn steel bearing Cr during heat treatment |
International Journal of Materials Research |
2022, 113.9: 809-819. |
汪勇 |
SCI |
9 |
Bio-inspired hydrogel with all-weatheradhesion, cooling and reusability functionsfor photovoltaic panels |
Solar Energy |
2021, 216: 358-364. |
吕铁铮 |
SCI |
10 |
Heterostructural MoO2/MoC2 microspheres for efficient electrocatalytic hydrogen evolution |
Materials Letters |
2021, 297(15):129973. |
张睿智 |
SCI |
11 |
Effect of Ce Content on Microstructure-Toughness Relationship in the SimulatedCoarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels |
Metals. |
2021, 11.12: 2003. |
曹羽鑫 |
SCI |
12 |
Computational comparison of oxidation stability: Sulfones vs. fluorinated sulfones |
Chemical Physics |
2021, 551: 111328. |
杜付明 |
SCI |
13 |
Study on a Novel Biodegradable andAntibacterial Fe-Based Alloy Prepared byMicrowave Sintering |
Materials |
2021, 14.14: 3784. |
邓彬 |
SCI |
14 |
Preparation of ZrO2 in SiC coating via hydrothermal method and sintering process onto carbon/carbon composite |
Materials Express |
2021, 11.12: 1997-2003. |
毛祖莉 |
SCI |
15 |
Two novel prediction methods for milling stability analysis based on piecewise polynomial interpolations |
international journal of advanced manufacturing technology |
2020,109:21113-2132 |
刘安民 |
SCI |
16 |
Microstructure, Texture and Mechanical Properties of AZ31 Magnesium Alloy Fabricated by High Strain Rate Biaxial Forging |
Materials |
2020, 3050(13):1-12 |
吴远志 |
SCI |
17 |
Fabrication of Strong and Ductile AZ31 Magnesium Alloy Using High Strain Rate Multiple Forging in a Wide Temperature Range |
Metals |
2020, 729(10):1-10 |
吴远志 |
SCI |
18 |
Effect of Pass Strain on the Microstructure, Texture and Mechanical Properties of AZ31 Magnesium Alloy Fabricated by High Strain Rate Multiple Forging |
Metals |
2020, 729(10):1-10 |
吴远志 |
SCI |
19 |
High Performance Aqueous Zinc–Manganese Battery with Reversible Mn2+/Mn4+ Double Redox Achieved by Carbon Coated MnOx Nanoparticles |
Nano-Micor Letter |
2020, 488: 537-545 |
张睿智 |
SCI |
20 |
Ultrafine Ni2P nanoparticles embedded in one-dimensional carbon skeleton derived from metal-organic frameworks template as a high-performance anode for lithium ion battery |
Journal of Alloys and Compounds |
2019, 775: 490-497. |
张睿智 |
SCI |
21 |
From sky back to sky: Embedded transparent cellulose membrane to improve the thermal performance of solar module by radiative cooling |
Case Studies in Thermal Engineering |
2020,18: 100596. |
吕铁铮 |
SCI |
22 |
Reaction Mechanism and Electrochemical Performance of Manganese (II) Oxide in Zinc Ion Batteries |
Solid State Ionic |
2020, 356(15439) |
张睿智 |
SCI |
23 |
Addition of Si3N4 Strengthens SiC Coatings via HeatTreatment with Nitrogen Gas ontoCarbon/Carbon Composites |
Coatings |
2020, 10: 787 |
毛祖莉 |
SCI |
24 |
Effect of La content on infrared radiation performance of lanthanum-cerium oxides for high temperature application |
Optical Materials |
2020,108:110211. |
黄建平 |
SCI |
25 |
Optimized combinatorial properties of an AlMgSi(Cu) alloy achieved by a mechanical–thermal combinatorial process |
Acta Metallurgica Sinica |
2020,33(5): 751–758 |
刘力梅 |
SCI |
26 |
Super-thin LiV3O8 nanosheets/graphene sandwich-like nanostructures with ultrahigh lithium ion storage properties |
Ceramics International |
2019, 45(3): 2968-2976. |
张睿智 |
SCI |
27 |
Hexagonal sheet-like tin disulfide@ graphene oxide prepared by a novel two-step method as anode material for high-performance lithium-ion batteries |
Materials Letters |
2019, 237: 29-33. |
张睿智 |
SCI |
28 |
Gel-assisted synthesis of CuCoS nanosheets for lithium-ion batteries |
Applied Surface Science |
2019, 488: 537-545. |
张睿智 |
SCI |
29 |
Tuning solar absorption spectra via carbon quantum dots/VAE composite layer and efficiency enhancement for crystalline Si solar module |
Progress in photovoltaic：researches &applications |
2019, 27: 283 |
吕铁铮 |
SCI |
30 |
Effect of Ultrasonic Treatment on the
Microstructure and Flexural Strength of
Carbon/Carbon Composites Impregnated with TaC and SiC Particles |
Science of
Advanced Materials |
2019,11: 730–737 |
毛祖莉 |
SCI |
31 |
Mechanical property and microstructure evolution of aged 6063 aluminum alloy under high strain rate deformation |
Vacuum |
2019, 159: 37-44. |
叶拓 |
SCI |
32 |
Dynamic mechanical behavior and microstructure evolution of an extruded 6013-T4 alloy at elevated temperatures |
Metals |
2019, 9(6): 629. |
叶拓 |
SCI |
33 |
Ultra-high cycle fatigue behavior of a novel 1.9 GPa grade super-high-strength maraging stainless steel |
Materials Science and Engineering: A |
2019, 755: 50-56 |
刘超 |
SCI |
34 |
Designing a high Si reduced activation ferritic/martensitic steel for nuclear power generation by using Calphad method |
Journal of Materials Science & Technology |
2019, 35:266-274 |
刘超 |
SCI |
35 |
Hot Deformation Behavior of a New Nuclear Use Reduced Activation Ferritic/Martensitic Steel |
Acta Metallurgica Sinica (English Letters) |
2019, 32(7): 825–834 |
刘超 |
SCI |
36 |
Enhanced photocatalytic activity of hybrid reduced graphene oxide–CeO2 hierarchical flower-like nanostructures |
Research on Chemical Intermediates |
2018, 44(4):2729-2738. |
黄建平 |
SCI |
37 |
Transformation of sludge Si to nano-Si/SiOx structure by oxygen inward-diffusion as precursor for high performance anodes in lithium ion batteries |
Nanoscale Research Letters |
2018, 13: 134 |
吕铁铮 |
SCI |
38 |
Influence of Electronic Conducting Additives on Cycle Performance of Garnet-based Solid Lithium Batteries |
Journal of Inorganic Materials |
2018, 33(4): 462-468 |
杜付明 |
SCI |
39 |
静电成形薄膜反射面天线的裁剪设计 |
工程力学 |
2022.10 |
杜雪林 |
EI |
40 |
时效工艺对6061铝合金力学性能各向异性的影响及微观组织研究 |
材料导报 |
2021,35(04): 4134-4138. |
刘伟 |
EI |
41 |
挤压态6013-T4 铝合金在动态冲击载荷下的变形行为及其微观机理 |
材料研究学报 |
2019, 33(2): 109-116. |
叶拓 |
EI |
您现在的位置: